- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 156 Author: Site Editor Publish Time: 2022-05-10 Origin: Site
At present, there are many debates about whether the air lubricator is still applicable to the high pressure pneumatic cylinder pneumatic system as before. Those in favor believe that lubrication can reduce the friction between the sliding surfaces of the air cylinder actuator, so as to improve the efficiency and the cyclic movement speed of the pneumatic components.
Another advantage is the reduction of wear. Traditional lubrication products are widely used for lubrication of non compressed air power equipment. However, many people think that lubrication is no longer needed.
multi stage pneumatic cylinder are very durable. Compared with other energy driven components of the same type, they have a longer service life.
Even in the most polished area of the non rotating air cylinder bore, there are actually some rough surfaces. Adding lubrication to the surface can achieve closer fitting and sealing of cylinder components.
The peaks and valleys on the surface of 20 µ in can be seen under the microscope. These areas are areas that can be covered by lubricating oil.
However, lubricators are considered unstable devices. It is difficult for designers and operators to accurately grasp the release of lubricating oil. Therefore, the correct type of lubricator should be used and an appropriate amount of lubricating oil should be released.
As modern cylinder assemblies become more reliable, many people believe that lubricators are no longer needed. However, the lubricator can ensure that the long-life equipment can be maintained and operated in a safe way to ensure that the operation of the tie rod cylinders pneumatic system does not exceed the specification.
Engineers who believe that the low friction pneumatic cylinder needs lubrication have developed the filter regulator lubricator, which is composed of three important components and can be adapted and compatible with a variety of compressed air circuits.
At present, lubrication is still used in most pneumatic systems. Nevertheless, some micro pneumatic cylinder pneumatic systems that do not use special cylinders still lack lubrication, as do single acting pneumatic cylinder pneumatic systems that are simple in structure and work only at a specified time.
If you want to build a non lubrication pneumatic cylinder with rotating shaft system, you need to carefully select each individual component at once. You must ensure that the air is strictly dry without any humidity. A very high filtration level is also required to ensure that no small particles enter the gear from the outside of the equipment.
At present, due to the development of high-quality lubrication devices, the current air lubrication is very practical for the automatic reciprocating pneumatic cylinder pneumatic system.
